Ekaterina Kotysheva

Published: 15 July 2015
kotysheva

NosovMagnitogorskStateTechnicalUniversity

Thesis Board Department

38, Lenin street, Magnitogorsk, 455000, ChelyabinskRegion, Russia

http://www.magtu.ru

e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

EDUCATION

  • 1984 – 1990 Chelyabinsk State Medical Institute
  • 2000 Awarded an academic degree of the Candidate of Medical Sciences (PhD)
  • 2008 Awarded an academic degree of the Doctor of Medical Sciences

RESEARCH EXPERIENCE

  • The methodology of the application of congenital morphogenetic variants in research on ecology and hygiene.
  • The influence of ecological factors on morphogenesis.

RESEARCH INTERESTS

  • Congenital morphogenetic variants
  • Adaptive capacities of children
  • Individual development of children from an industrial town

TEACHING AND EDUCATIONAL ACTIVITIES

Course Titles:

  • Hygiene
  • Human Anatomy
  • Human Physiology

PUBLICATIONS

  1. Kotysheva E.N., Bolotskaia M.I. Adaptive capacities of children with different number of congenital morphogenetic variants.  Gigiena i sanitariia, 2011, Nov-Dec (6), рр. 69-73.
  2. Kotysheva E.N. Effect of chemical air pollution on congenital morphogenetic variants.  Gigiena i sanitariia, 2011, Sep-Oct (5), рр. 84-86.
  3. Kotysheva E.N. Some data of individual development of children living in an industrial town. Medical science and education of the Urals, 2009 (3), pp. 98-99. http://www.tyumsma.ru/assets/files/upload/2368/mniou-2009-3-t.10-59.pdf
  4. Kotysheva E.N., Bolotskaya M.Iu., Gorbunova N.A., Bolotina E.S., Tiunova T.A. Adaptive capacities and congenital morphogenetic variants of children. Medical science and education of the Urals, 2009 (3), pp. 100-101. http://www.tyumsma.ru/assets/files/upload/2368/mniou-2009-3-t.10-59.pdf
  5. Kotysheva E.N., Dzyundzya N.A., Bolotskaya M.Iu. The analysis of anthropometrical indicators of physical development of children of 5-7 years old in the conditions of the industrial city. Pediatrics, 2008, 87 (2), рр. 140-143. http://www.pediatriajournal.ru/files/upload/mags/289/2008_2_2095.pdf
  6. Kotysheva E.N. Characteristics of congenital morphogenetic variants in hygienic studies. Gigiena i sanitariia, 2007, Nov-Dec (6), рр. 86-88.
  7. Kotysheva E.N., Dziunda N.A., Bolotskaia M.I. Individual development of children from an industrial town. Gigiena i sanitariia, 2007, Jul-Aug (4), pp. 69-71.
  8. Kotysheva E.N. Medical genetic methods of studies of the influence of ecological factors on morphogenesis. Bulletin of the Novosibirsk State University. Series: Biology, clinical medicine. 2007, 5 (2), pp. 82-87.  http://elibrary.ru/download/16139657.pdf
  9. Kotysheva E.N. Influence of smoking of parents on prenatal morphogenesis. Bulletin of TSU. Series: Natural and Technical Sciences, 2006, 11(4), pp. 518-519. http://elibrary.ru/download/16554391.pdf
  10. Kotysheva E.N. Congenital morphogenetic variants among children living in Magnitogorsk. Human Ecology, 2006, (12), pp. 27-31. http://elibrary.ru/download/25030343.pdf
  11. Kotysheva E.N., Bolotskaia M.I., Koshkina V.S., Khripach L.V., Revazova I.A. Some environmental and hygienic aspects of preschool children's health in an industrial town. Gigiena i sanitariia, 2004, Jul-Aug (4), рр. 55-57.

Additional Information

Scopus Author ID: 6506722165

http://www.scopus.com/authid/detail.url?authorId=6506722165

Sergey Kadchenko

Published: 15 July 2015
kadchenko

Nosov Magnitogorsk State Technical University

Applied Mathematics and Computer Science Department

38, Lenin street, Magnitogorsk, 455000, Chelyabinsk Region, Russia

http://www.magtu.ru

e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

EDUCATION

  • 1967 -1971     Rostov-on- Don State Pedagogical Institute, Major: Physics
  • 1985 Awarded an academic degree of the Candidate of Physics and Mathematics (PhD)
  • 2004 Awarded an academic degree of the Doctor of Physics and Mathematics
  • 2006 Awarded an academic rank of the Professor

RESEARCH EXPERIENCE

Mathematical simulation of complicated technological processes:

  • runaway of a unipolar energy storage unit with magnetohydrodynamic sliding supports,
  • cast iron crystallization in moulds when forming double layer rolls for rolling mills,
  • the non-isothermal stress-strain state of a surface plastic layer,
  • a non-isothermal process of spreading viscous fluid drops on solid cylindrical surfaces,
  • the stress-strain state of bars in their drawing.

Theoretical research to develop two new numerical methods of calculating eigenvalues and eigenfunctions of perturbed self-adjoint operators.

RESEARCH INTERESTS

  • Spectral theory of operators
  • Inverse spectral problems
  • Industrial mathematics

TEACHING AND EDUCATIONAL ACTIVITIES

Course Titles:

  • Modern numerical methods of mathematical physics
  • Mathematical simulation
  • Equations of mathematical physics
  • Theory of integral equations

PhD students:

  • Five PhD students defended their theses for an academic degree of the Candidate of Physics and Mathematics (PhD)

PUBLICATIONS

  1. Application of the protective coating by a frictional-mechanical method for increasing the durability of machines and materials. Journal for Technology of Plasticity, Vol. 21, 1996, no. 1-2.
  2. Calculation of the first eigenvalues of the boundary-value problem of hydrodynamic stability of a flow between two parallel planes at low Reynolds numbers. Proceedings of the Academy of Sciences, 1997, Vol. 355, no. 5, p. 600.
  3. Calculation of the first eigenvalues of a discrete operator. Electromagnetic waves and electronic systems, 1998, Vol. 3, no. 2, pp. 6 – 8.
  4. Calculation of the first eigenvalues of a boundary-value problem of the hydrodynamic stability of the Poiseuille flow in a round tube. Differential Equations, 1998, Vol. 34, no. 1, pp. 50 – 53.
  5. A regularized trace theory and calculation of the first eigenvalues of the Orr-Zomerfield boundary value problem. International conference on the operator theory and applications to scientific and industrial problems, the Institute of Industrial Mathematical Sciences, the University of Manitoba, Canada, 1998.
  6. Calculation of eigenvalues of a problem of the hydrodynamic stability of a viscous liquid flow between two rotating cylinders atlowReynolds numbers. Proceedings of the Academy of Sciences, 1998, Vol. 363, no. 6, pp. 748-750.
  7. Calculation of the first eigenvalues of the hydrodynamic stability problem for a viscous fluid flow between two rotating cylinders. Differential Equations, 2000, Vol. 36, no. 6, pp. 742-746.
  8. A new method to calculate eigenvalues of the Orr-Sommerfeld spectral problem. Electromagnetic waves and electronic systems, 2000, Vol. 5, no. 6, pp. 4– 10.
  9. A new method of approximate calculation of the first eigenvalues of the Orr-Sommerfeld spectral problem. Proceedings of the Russian Academy of Sciences, 2001, Vol. 378, no. 4, pp. 443-446.
  10. A new approximate calculation method for the first eigenvalues of a spectral problem of the hydrodynamic stability of the Poiseuille flow in a round tube. Proceedings of the Russian Academy of Sciences, 2001, Vol. 380, no. 2, pp.160-163.
  11. A new method to calculate the first eigenvalues of a spectral problem of the hydrodynamic theory of stability for a viscous fluid flow between two rotating cylinders. Proceedings of the Russian Academy of Sciences, 2001, Vol. 381, no. 3, pp. 320-324.
  12. Stability of the Kutta plane-parallel flow. Electromagnetic waves and electronic systems, 2005, Vol. 10, no. 1-2, pp. 10– 21.
  13. Computing sums of the Rayleigh-Schrödinger series of perturbed self-adjoint operators. Computational Mathematics and Mathematical Physics, 2007, Vol. 47, no. 9, pp. 1494-1505.
  14. The method of finding eigenvalues of the discrete semi-bounded from below operator. Bulletin of SUSU, series of Mathematical Modelling and Programming, 2011, no. 17 (234), Vol. 8, pp. 46 – 51.
  15. Non-isothermal spreading of viscous fluid drops along a horizontal tube. Chelyabinsk State University Bulletin, 2012, no. 31, pp. 16-19.
  16. Mathematical simulation of the heating process of a viscous liquid drop spreading over a horizontally oriented cylindrical pipe. Heat power engineering, 2013, no. 9, pp. 36-39.
  17. A numerical computation of inverse problems, generated by perturbed self-adjoint operators, with a regularized trace method. Vestnik of Samara State University. Naturalistic series, 2013, no. 6 (107), pp. 23 - 30.
  18. A numerical computation of inverse problems, generated by perturbed self-adjoint operators. Bulletin of the South Ural State University. Series: Mathematical Modelling and Programming, 2013, Vol. 6, no. 4, pp. 15 – 25.

Additional Information

Scopus Author ID: 6603287106

https://www.scopus.com/authid/detail.url?authorId=6603287106

Mikhail Abramzon

Published: 15 July 2015
abramzon

Nosov Magnitogorsk State Technical University

Institute of History, Philology and Foreign Languages

38, Lenin street, Magnitogorsk, 455000, Chelyabinsk Region, Russia

http://www.magtu.ru

e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

EDUCATION

  • 1978 -1983   Magnitogorsk State Pedagogical Institute, Major: Art and Drawing, Art Criticism
  • 1986-1990   Chelyabinsk State Pedagogical Institute, Major: History and Social Studies
  • 1990-1992   Lenin Moscow State Pedagogical University (postgraduate study), Major: Ancient History
  • 1993 Awarded an academic degree of the Candidate of Historical Sciences (PhD)
  • 1996 Awarded an academic degree of the Doctor of Historical Sciences
  • 1997 Awarded an academic rank of the Professor

RESEARCH  EXPERIENCE

Excavations:

  • Trans-Urals Bronze Age Settlements
  • The North Pontic Region (Olbia, Phanagoria, Gorgippia, Eastern Crimea)
  • Northern Kazakhstan
  • Greece

Leadership and participation in projects:

  • Russian Foundation for Basic Research
  • Russian Fund of Humanitarian Research
  • Russian-French project CNRS (1997-2000)
  • Russian-Abkhazian project (2000-2002)
  • Russian-Swedish project (2010-2015)

Lectures (guest professor) given at:

  • Messina University
  • Göttingen University
  • Danish National Museum
  • Danish Archaeological Institute

Foreign scholarships and grants

  • École française d’Athènes (EfA) – 2000
  • Deutsches Archäologisches Institut (DAI) – 2015

RESEARCH INTERESTS

  • Ancient History
  • Classical Archaeology
  • The North Pontic Region in the Antiquity
  • Ancient Numismatics

TEACHING AND EDUCATIONAL ACTIVITIES
Course Titles:

  • Ancient History.
  • Archaeology.
  • Ancient Numismatics.

PhD students:

  • Four PhD students defended their theses for an academic degree of the Candidate of Historical Sciences (PhD)

PUBLICATIONS

  1. Abramzon M.G., Gorlov Ju.V. 1997. Two Staters of Philip III Arrhidaeus Found in Phanagoreia, Ancient Civilizations from Scythia to Siberia 3.2, 129‒132.
  2. Abramzon M.G., Maslennikov A.A. 1999. Gold coins of Theodosius II from the East Crimea, Ancient Civilizations from Scythia to Siberia 5.3, 207-213.
  3. Müller Chr., Abramzon M., Fouache É., Gaibov V., Gorlov Yu., Porotov A. 1999. Péninsule de Taman (Russie méridionale), Bulletinde Correspondance Hellénique 123, 589-598.
  4. Müller Chr., Abramov A., Abramzon M., Alexeieva E., Bezruchenko I., Gorlov Yu., Efimov A., Kuznetsov V., Maslennikov A., Malyshev A., Savostina E., Tolstikov V., Zavoikin A. 2000. Chronigue des fouilles et déscouvertes archéologiques dans le Bosphore cimmérien (mer Noire septentrionale), Bulletin de Correspondance Hellénique 124, 701-751.
  5. Abramzon M.G., Frolova N.A. 2001. А Hoard of Bosporan Gold Staters of the 2nd Century AD from the City-Site Krasnobatereinoye, Ancient Civilizations from Scythia to Siberia 7. 3-4, 169-184.
  6. Abramzon M.G., Frolova N.A., Gorlov Yu.V. 2001. А Hoard of Bosporan Gold Staters of the 2nd and the 3rd Centuries AD from the Village of Kazanskaya, Ancient Civilizations from Scythia to Siberia 7. 3-4, 185-193.
  7. Abramzon M.G., Frolova N.A., Gorlov Yu.V. 2001. Two Hoards of Bosporan Coins, Revue Numismatique 157, 287-303.
  8. Abramzon M. 2001. The Motif of Struggle against Tribes of European Sarmatia and Scythia on Roman Imperial Coinage, in: G.R. Tsetskhladze (ed.), North Pontic Archaeology. Recent Discoveries and Studies (Colloquia Pontica 6), Leiden-Boston-Köln, 423-433.
  9. Abramzon M.G., 2002. The “Coronation Coin” of the Thracian King Rhoemetalces III, TAΛANTA. Proceedings of the Dutch Archaeological and Historical Society. Vol. XXXII-XXXIII. Amsterdam, 239-242.
  10. Abramzon M.G. 2003. The Gerzeul Hoard of Coins of Caesarea of Cappadocia (in the Museum of Abkhazia), Revue Numismatique 159, 243-256.
  11. Abramzon M.G. 2003. The hoard of silver coins of the 6th-4th centuries B.C. from Tyramba (the Taman peninsula), XIII Cogresso Internacional de Numismatica. Abstracts of Papers. Madrid, 25.
  12. Abramzon M.G. 2004. Ancient Gold Coins in the Abkhazian State Museum, Ancient Civilizations from Scythia to Siberia10. 1-2, 35-46.
  13. Abramzon M., Frolova N. 2004. The Hoard of Silver Coins of the 6th-4th Centuries BC from the Taman Peninsula, Revue Numismatigue 160, 27-48.
  14. Abramzon M. 2007. Gold and Silver Greek Coins of the 5th-2nd centuries BC found in Dioscurias (the Abkhazian Museum), Античнитецивилицациииморето (Acta Musei Varnaensis. Vol. V). Varna, 159-175.
  15. Abramzon M., Frolova N. 2007. Le trésor de Myrmekion de statères cyzicènes, Revue Numismatique 163, 15‒44.
  16. Abramzon M. 2008. The 1961 Kerch Hoard of Bronze Coins and Some Chronological Problems of the Bosporan Coinage of the 1st century BC, Нумизматични, сфрагистичнииепиграфскиприносикъмисториятанаЧерноморскотоКрайбрежие(Acta Musei Varnaensis. Vol. VII-1). Varna, 136-148.
  17. Abramzon M. 2011. The Roman and Early Byzantine Coins from the 1988, 2005‒2010 excavations at Phanagoria, in: N. Povalahev, V. Kuznetsov (Hrsg), Phanagoreia, KimmerischerBosporos, PontosEuxeinos (Altertümer Phanagoreias. Bd. 1). Göttingen, 251‒274.
  18. Abramzon M., Kuznetsov V. 2011. The Phanagorian revolt against Mithridates VI Eupator (numismatic evidence), in: N. Povalahev, V. Kuznetsov (Hrsg.), Phanagoreia und seine historische Umwelt (Altertümer Phanagoreias. Bd. 2). Göttingen, 15‒90.
  19. Abramzon M., Kuznetsov V. 2011. The Rebellion in Phanagoria in 63 BC (New Numismatic Evidence), Ancient Civilizations from Scythia to Siberia 17, 75‒110.
  20. Abramzon M.G., Treister M.Y., Vinokurov N.I. 2012. Two Hoards of Coins and Jewellery Items from the Time of the Roman-Bosporan War of AD 45-49 from the Site of Artezian, Ancient Civilizations from Scythia to Siberia 18.2, 207-278.
  21. Abramzon M. 2012. A hoard of bronze Pontic and Bosporan coins of the reign of Mithradates VI from Phanagoria, 2007, in: G.R. Tsetskhladze (ed.), The Black Sea, Paphlagonia, Pontus and Phrygia in Antiquity. Aspects of archaeology and ancient history (British Archaeological Reports Series 2432). Oxford, 1–8.
  22. Abramzon M., Kuznetsov V. 2014. A Hoard of 4th – 1st centuries BC from Phanagoria, in: N. Povalahev (Hrsg.),Phanagoreiaunddarüberhinaus…FestschriftfürVladimirKuznetsov(Altertümer Phanagoreias. Bd 3).Göttinen, 139‒192.
  23. Abramzon M., Karpov D., Sudarev N. 2015. An Asander’s Gold Stater with Magic Graffito and a Labrys from the Settlement Tsemesskaya Roscha: Evidence for Sacrifice, Ancient Civilizations from Scythia to Siberia21, 1-22.

Additional Information

  • Scopus Author ID: 26034283500
  • http://www.scopus.com/authid/detail.url?authorId=26034283500

Vakhit Bigeev

Published: 02 April 2014
bigeev

Nosov Magnitogorsk State Technical University

Ferrous Metallurgy Department

38, Lenin street, Magnitogorsk, 455000,

ChelyabinskRegion, Russia

e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

EDUCATION

  • 1970 – 1975 Nosov Magnitogorsk Institute of Mining and Metallurgy
  • 1981 Awarded an academic degree of the Candidate of Engineering Sciences (PhD)
  • 2001 Awarded an academic degree of the Doctor of Engineering Sciences
  • 2004 Awarded an academic rank of the Professor

RESEARCH EXPERIENCE

  • Intensification of the melting charge in the EAF process by optimizing power mode management
  • Reducing resource intensity of steelmaking by improving a slag forming process and its utilization

RESEARCH INTERESTS

  • EAF steel production
  •  Ladle treatment of metals
  • Recycling of materials in ferrous and non-ferrous metallurgy

TEACHING AND  EDUCATIONAL ACTIVITIES

Course Titles:

  • Ferroalloys Production
  • Up-to-date Technologies in Metal Manufacturing
  • Material Production and Processing in Metallurgy

Doctoral Degrees:

  • Two applicants defended their dissertations for an academic degree of the Doctor of Engineering Sciences (DSc).

PhD students:

  • Twelve PhD students defended their theses for an academic degree of the Candidate of Engineering Sciences (PhD).

PUBLICATIONS

  1. Bigeev V. A., Nikolaev A. O., Brusnikova A. V. Production of low-sulfur steel with limited hydrogen content. Steel in Translation, 2014, Vol. 44, No. 4, pp. 272-275.
  2. Bigeev V. A., Nosov S. K.,  Sarychev B. A. Development of the manufacture of armor steel in the Magnitogorsk metallurgical works. Russian Metallurgy (Metally), June 2014, Volume 2014, Issue 6, pp. 471-473.
  3. Bigeev V. A., Nikolaev A. O., Sychkov A. B. Effect of the production factors on the hydrogen saturation of steel. Russian Metallurgy (Metally), June 2014, Volume 2014, Issue 6, pp. 454-459.
  4. Nikolaev A. O., Bigeev V. A., Nikolaev O. A., Chigasov D. K. Degassing of pipe steels under the conditions of KKTs (BOF shop) of OAO MMK. Russian Metallurgy (Metally), December 2013, Volume 2013, No. 12, pp. 901-901.
  5. Berdnikov S. N., Berdnikov A. S., Podosyan A. A.,  Pozin A. E.,  Bigeev V. A., Vdovin K. N. Using production wastes in electroslag remelting. Steel in Translation, 2011, Vol. 41, No. 5, pp. 413-415.
  6. Bigeev V. A., Malofeev A. E., Panteleev A. V.,  Ivin Yu. A., Valiakhmetov A. Kh. Material and heat balance in DSP-180 (EAF-180) at OAO MMK. Russian Metallurgy (Metally), December 2009, Volume 2009, 12, pp. 610-611.
  7. Manashev I. R., Shatokhin I. M.,  Ziatdinov M. Kh., Bigeev V. A. Microalloying of steel with boron and the development of ferrotitanium boride. Steel in Translation, 2009, Vol. 39, No. 5, pp. 896-900.
  8. Bigeev V. A., Malofeev A. E.,   Panteleev A. V., Nikolaev O. A., Ivin Yu. A. Slag conditions in arc furnaces. Steel in Translation, 2009, Vol. 39, No. 3, pp. 238-239.

Additional Information

Scopus Author ID: 6507531523

https://www.scopus.com/authid/detail.url?authorId=6507531523

Aleksey Korchunov

Published: 02 April 2014
korchunov

Nosov Magnitogorsk State Technical University

Department of Design and Operation of Metallurgical Machines and Equipment

38, Lenin street, Magnitogorsk, 455000, ChelyabinskRegion, Russia

http://www.magtu.ru

e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

EDUCATION

  • 1989-1994 Nosov Magnitogorsk Institute of Mining and Metallurgy, the Faculty of Technology. Major: Metal Forming
  • 2001 Awarded an academic degree of the Candidate of Engineering Sciences (PhD)
  • 2010 Awarded an academic degree of the Doctor of Engineering Sciences
  • 2013 Awarded an academic rank of the Professor

RESEARCH EXPERIENCE

Development of metalware manufacturing technologies to produce:

  • low and high carbon wire for reinforced concrete structures,
  • spring-based couplings for railroad ties,
  • high-strength reinforcement bars for ferroconcrete ties used on modern railroad lines,
  • sized steel for the machine-building industry.

RESEARCH INTERESTS

  • Theoretical and field study of wire and sized steel drawing processes.
  • Technological inheritance in metalware manufacturing technologies.  
  • Quality control in metalware manufacturing technologies. 

TEACHING AND EDUCATIONAL ACTIVITIES

Course Titles:

  • Metal forming technologies (metalware manufacturing).
  • Modeling of metal forming processes.
  • Quality control in metalware manufacturing technologies.

PhD students:

  • Four PhD students defended their theses for an academic degree of the Candidate of Engineering Sciences (PhD).

PUBLICATIONS

  1. Ensuring product quality in hardware-manufacturing technologies. Metallurgist, Vol. 52, Nos. 9-10, 2008, pp. 574-581.
  2. Improving the quality control of spring-based couplings for railroad ties. Steel in Translation, 2008, Vol. 38, No. 1, pp. 60-62.
  3. Deformation and thermohardening of reinforcement for ferroconcrete crossties. Steel in Translation, 2009, Vol. 39, No. 1, pp. 80-83.
  4. Quality control of hardware products based on the use of fuzzy models to describe technological inheritance. Metallurgist, Vol. 53, Nos. 5-6, 2009, pp. 290-295.
  5. Forming ultrafine-grain structure in steel wire by continuous deformation. Steel in Translation, 2010, Vol. 40, No. 6, pp. 595-597.
  6. Production of stabilized high-strength reinforcement steel for the new generation of ferroconcrete railroad ties. Metallurgist, Vol. 55, Nos. 1-2, May, 2011, pp.54-58.
  7. Controlling the structure and properties of nanostructural carbon steel. Steel in Translation, 2012, Vol. 42, No. 10, pp. 745-749.
  8. Development and efficiency estimation of the method of continuous deformation nanostructuring of high-carbon steel wire. Nanocon 2012. 23 – 25 Oct, 2012. Brno, Czech Republic, EU Conference proceedings, pp. 137-141.
  9. Forming of nanodimentional structure parts in carbon steels. Waset 2012. International conference, 22 – 23 Dec, 2012. Bangkok, Thailand, Issue 72, pp. 1116-1119.
  10. Research of multipass processes of cold plastic deformation on the basis of mathematical modeling by the method of Markov chains. European Science and Technology: proceedings of the 4th International Research and Practice Conference, Vol. I, Munich, Germany, 2013, pp. 223-230.
  11. Assessing the effectiveness of intense plastic deformation of structural carbon steel. Steel in Translation, 2013, Vol. 43, No. 2, pp. 50-54.
  12. Methodology of developing mathematical models with fuzzy logic elements for quality indices control. Applied Mechanics and Materials, Vol. 436 (2013), pp. 374-381.
  13. Technological inherited connections in a continuous method of deformational nanostructuring. Applied Mechanics and Materials, Vol. 555 (2014), pp. 401-405.
  14. Finite element modeling of shear strain in rolling with velocity asymmetry in multi-roll calibers. Key Engineering Materials, Vols. 622-623 (2014), pp. 912-918.
  15. Recovery effect in drawing of steel bar for sizing. Procedia Engineering, 81 (2014), pp. 676-681.
  16. Finite element modeling of shear strain in asymmetric and symmetric rolling in multi-roll calibers. Procedia Engineering, 81 (2014), pp. 2469-2474.

Additional Information

Scopus Author ID: 24474784300

Researcher ID: B-1090-2014

http://orcid.org/0000-0002-2844-8283

Gennadiy Kornilov

Published: 02 April 2014
kornilov

Nosov Magnitogorsk State Technical University

Department of Electric Power Supply of Industrial Plants

38, Lenin street, Magnitogorsk, 455000, ChelyabinskRegion, Russia

http://www.magtu.ru

e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

EDUCATION

  • 1967-1972  Nosov Magnitogorsk Institute of Mining and Metallurgy
    Major: Electric Drives and Automation of Industrial Plants
  • 1978 Awarded an academic degree of the Candidate of Engineering Sciences (PhD)
  • 2010 Awarded an academic degree of the Doctor of Engineering Sciences
  • 2013 Awarded an academic rank of the Professor

RESEARCH EXPERIENCE

  • Research on main drives of hot wide strip mills
  • Research on the EAF-static thyristor VAR compensator complex
  • Research on active rectifiers (AFE)

RESEARCH INTERESTS

  • Development and optimization of control systems for power-consuming metallurgical facilities.
  • Research on electric power quality parameters and electromagnetic compatibility.

TEACHING AND  EDUCATIONAL ACTIVITIES

Course Titles:

  • Electric power quality control.
  • Power supply of industrial plants.

PhD students:

  • Seven PhD students defended their theses for an academic degree of the Candidate of Engineering Sciences (PhD)

PUBLICATIONS

  1. Khramshin T.R., Abdulveleev I.R., Kornilov G.P. Ensuring electromagnetic compatibility of high-capacity electrical complexes. Bulletin of the South Ural State University. Series: Power Engineering, 2015, vol. 15, no. 1, pp. 82-93.
  2. Novoselov N.A., Nikolaev A.A., Kornilov G.P. Analysis of electric power quality parameters when designing electric power supply systems of low-capacity electric arc furnaces: Monograph. Nosov Magnitogorsk State Technical University. Magnitogorsk, 2014.
  3. Abdulveleev I.R., Kornilov G.P. Complex simulation calculations of overhead transmission lines. Industrial power engineering, 2014, no. 6, pp. 12-19.
  4. Novoselov N.A., Nikolaev A.A., Kornilov G.P. Calculation techniques for a short-term flicker indicator in networks with electric arc furnaces. Industrial power engineering, 2014, no. 1, pp. 27-31.
  5. Nikolaev A.A., Kornilov G.P., Anufriev A.V., Pekhterev S.V., Povelitsa E.V. Current problems of optimization of electrical modes of high-capacity electric arc furnaces. Steel, 2014, no. 4, pp.37-47.
  6. Nikolaev A.A., Kornilov G.P., Yakimov I.A. Research on electric arc furnace operating modes in a complex with static thyristor VAR compensator. Part 1. Electrometallurgy, 2014, no. 5, pp.15-22.
  7. Nikolaev A.A., Kornilov G.P. , Yakimov I.A. Research on electric arc furnace operating modes in a complex with static thyristor VAR compensator*. Part 2. Electrometallurgy, 2014, no. 6, pp.9-13.
  8. Nikolaev A.A., Kornilov G.P., Anufriev A.V. Electrical optimization of superpower arc furnaces. Steel in Translation, 2014, vol. 44, no. 4, p. 289.
  9. Khramshin T.R., Kornilov G.P., Krubtsov D.S., Nikolaev A.A., Karandaeva O.I., Zhuravlev P.Yu. Methods to increase stability of electric drives at continuous functioning facilities in case of voltage falls. Bulletin of the South Ural State University. Series: Power Engineering, 2014, vol.14, no. 2, pp. 80-87.
  10. Abdulveleev I.R., Kornilov G.P., Shemetov A.N. Automated calculation of reliability of overhead transmission lines in critical weather conditions. Electrical equipment: operation and repair, 2014, no. 7, pp. 30-38.
  11. Kornilov G.P., Kovalenko A.Yu., Nikolaev A.A., Abdulveleev I.R., Khramshin T.R. Limiting voltage falls in electric power supply systems of industrial plants. Electrical systems and complexes, 2014, no. 2 (23), pp. 44-48.
  12. Khramshin T.R., Krubtsov D.S., Kornilov G.P. A mathematical model of a power diagram of rolling mill main drives. Electrical engineering: network electronic scientific journal, 2014, vol. 1, no. 1, pp. 3-7.
  13. Khramshin T.R., Krubtsov D.S., Kornilov G.P. A mathematical model of active rectifiers in non-symmetrical operation modes. Electrical engineering: network electronic scientific journal, 2014, vol. 1, no. 2, pp. 3-9.
  14. Yakimov I.A., Nikolaev A.A., Kornilov G.P. Research on extra high-capacity electric arc furnaces with thyristor voltage regulators in an intermediate circuit of furnace transformers. Electrical engineering: network electronic scientific journal, 2014, vol. 1, no. 1, pp. 41-47.
  15. Nikolaev A.A., Kornilov G.P., Tulupov P.G., Yakimov I.A., Povelitsa E.V., Anufriev A.V. Development of an improved automatic control system for positioning electrodes of electric arc furnaces and ladle furnaces. Electrical engineering: network electronic scientific journal, 2014, vol. 1, no. 1, pp. 48-58.

Additional Information

Scopus Author ID: 6603579940.

http://www.scopus.com/authid/detail.url?authorId=6603579940

Krishan Anatoly

Published: 02 April 2014
krishan

Nosov Magnitogorsk State Technical University

Building and Structural Engineering Department

38, Lenin street, Magnitogorsk, 455000, Chelyabinsk Region, Russia

http://www.magtu.ru

e-mail:  This email address is being protected from spambots. You need JavaScript enabled to view it.

EDUCATION

  • 1974 -1979  Nosov Magnitogorsk Institute of Mining and Metallurgy,
    Major: Industrial and Civil Engineering
  • 1987 Awarded an academic degree of the Candidate of Engineering Sciences (PhD)
  • 2011 Awarded an academic degree of the Doctor of Engineering Sciences
  • 2013 Awarded an academic rank of the Professor

RESEARCH EXPERIENCE

Improvement of engineering and manufacturing methods for steel concrete beam columns for frames of multi-storey buildings:

  • concrete filled steel tube columns with various cross-section shapes made of pressed concrete or self-stressing concrete,
  • preliminary stressed concrete filled steel tube beams made of self-stressing concrete,
  • butt joints of beam and beamless floors to columns.

RESEARCH INTERESTS

  • Theoretical and field study of composite steel concrete column strength taking into account slenderness.
  • Theoretical and field study of strength of concrete filled steel tube columns.
  • Theoretical and field study of strength and stiffness of composite steel-concrete beams.

TEACHING AND  Educational Activities

Courses Titles:

  • Reinforced concrete and masonry structures.
  • Theory of reinforced concrete.

PhD students:

  • Seven PhD students defended their theses for an academic degree of the Candidate of Engineering Sciences (PhD)

 

PUBLICATIONS

  1. Steel pipe-concrete columns with preliminary pressed core. Application of Codes, Design and Regulations. Opportunities: Proceedings of the Internatinal Conference held at the University of  Dundee, Scotland, UK on 5-7 July,  2005.- P.725-733.
  2. New approach to estimating  the durability of compressed  pipe-concrete columns. Concrete Durability: Achievement and Enhancement: Proceedings of the 7th International Congress held at the University of Dundee, Scotland, UK on 8-10 July 2008. - P.143-151.
  3. Strength calculation of normal sections concrete-filled steel tube columns. International Journal for Computational Civil and Structural Engineering. - 2008. № 2.-Р.80-81.
  4. Concrete filled steel tube columns  with preliminary соmpressed concrete core. Non Traditional Cement &  Concrete: Proceedings of  4th International Conference at the University of Brno, Czech  Republic on 27-30 June 2011. P. 293-299.
  5. New construction of concrete filled steel tube. Scientific enquiry in the con-temporary world: Theoretical basics and innovative approach: Reseach articles.Vol. 4. Technical Sciense. – L&L Publishing, Titusville, USA, 2012.- P.39-41.  
  6. The strength of concrete filled steel box columns. International Conference “TECHNICAL SCIENCES: MODERN ISSUES AND DEVELOPMENT PROSPECTS”: Conference Proceedings.-B&M Publishing USA, San Francisco, California, 2013.-pp.164-166.
  7. Strength of axially loaded concrete-filled steel tubular columns with circular cross-section. Electronic magazine “Advances of Environmental Biology”.  Volume 8, № 6, May 2014, pp.1991-1994, http://www.aensiweb.com/aeb_online.html
  8. Estimation of carrying capacity of eccentrically compressed concrete-filled steel tube columns. Electronic magazine “Advances of Environmental Biology”.  Volume 8, № 6, May 2014, pp.1974-1977, http://www.aensiweb.com/aeb_online.html
  9. Power resistance of compressed concrete elements with confinement reinforcement by means of meshes. Electronic magazine “Advances of Environmental Biology”.  Volume 8, № 6, May 2014, pp.1987-1990, http://www.aensiweb.com/aeb_online.html
  10. Calculation of strength of concrete filled steel box columns.  Non Traditional Cement &  Concrete V: Proceedings of the International Conference organized by Brno University of Technology, Czech  Republic on 16-19 June 2014. pp. 115-118.
  11. Calculation of strength of concrete filled steel box columns. International Journal of Research in Engineering and Technology. 2014. Vol-03. Special Issue 13. - pp.77-81.                                                                                                                                                                                                                                                               

Аdditional Information

Oksana Logunova

Published: 02 April 2014
logunova

Nosov Magnitogorsk State Technical University

Computer Engineering and Programming Department

38, Lenin street, Magnitogorsk, 455000, ChelyabinskRegion, Russia

http://www.magtu.ru

e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.,

EDUCATION

  • 1984-1989 Magnitogorsk State Pedagogical Institute, Faculty of Physics and Mathematics
  • 2000 Awarded an academic degree of the Candidate of Engineering Sciences (PhD)
  • 2002 Awarded an academic rank of the Associate Professor
  • 2009 Awarded an academic degree of the Doctor of Engineering Sciences

RESEARCH EXPERIENCE

Study of relationship between quality rating of a continuous cast billet and process variables of continuous casting of steel at OJSC Magnitogorsk Iron and Steel Works.

Further development of this field made it necessary to extend the informational support of the continuous casting technology proved the importance of automatic process control system development in the field of continuous casting of billets.

Development of a mathematical and informational support for ergatic modules of a control system in the sections of secondary cooling of continuous cast billets.

RESEARCH INTERESTS

  • Development of the basics of a practical application of the pattern recognition theory and computer vision in automatic process control systems in metallurgy
  • Improvement of mathematical modeling methods for metallurgical processes
  • Comprehensive research of data flows in control systems of metallurgical processes

TEACHING AND  EDUCATIONAL ACTIVITIES

Course Titles:

  • Theory and practice of information processing
  • Experimental data processing on a computer
  • Computer vision basics
  • Management in social and economic systems
  • Research automation

PhD students:

Three PhD students defended their theses for an academic degree of the Candidate of Engineering Sciences (PhD)

PUBLICATIONS

  1. Matsko I. I., Logunova O.S., Snegirev Yu. V., Pavlov V. V., Kovaleva E. S. Data acquisition, preparation and processing methods by means of continuous cast billets' quality analysis software. International Journal of Applied Physics and Mathematics, vol. 1, no. 2, pp. 106-111, 2011.
  2. Logunova O.S., Pavlov V.V., Matsko I.I., Pavlov I.V. An empirical model of residual element content in steel when three component burden is used in the process of steel production in electric arc furnaces. Journal of Mining World Express (MWE), 2012, vol. 1, pp. 21-26 http://www.vkingpub.com/mwe/ © American V-King Scientific Publishing
  3. Matsko I.I., Snegirev Yu.V., Logunova O.S. Data acquisition and preparation methods for continuous cast billets quality analysis software. Applied Mechanics and Materials, vols. 110-116, (2012), pp. 3557-3562.
  4. Matsko I.I., Logunova O.S. Feedback implementation in the control system of conti­­nuous cast billet production. The Second International Conference on Electronics, Communications and Control, 2012, pp. 9 – 12. DOI 10.1109/ICECC.2012.498
  5. Matsko I.I., Posokhov I.A., Logunova O.S., Lukyanov S.I. An automatic system for intelligent support of continuous cast billet production control processes. The International Journal of Advanced Manufacturing Technology, 2014, vol. 74, issue 9, pp. 1407 – 1418. DOI: 10.1007/s00170-014-6056-4
  6. Logunova O.S., Pavlov V.V. Stabilizing the residual contents of elements in steel by using alternative materials in the metallic charge of an electric arc furnace. Metallurgist, 2014, vol. 58(3), pp. 299 – 305. DOI: 10.1007/s11015-014-9905-3
  7. Parsunkin B.N., Andreev S.M.., Logunova O.S., Akhmetov T.U. Energy-saving optimal control over heating of continuous cast billets. The International Journal of Advanced Manufacturing Technology, 2015. DOI: 10.1007/s00170-015-6934-4

Additional Information

Scopus Author ID: 14629283100

http://www.scopus.com/authid/detail.url?authorId=14629283100

ORCID ID: http://orcid.org/0000-0002-7006-8639

More Articles ...

  1. Sergey Platov
  2. Mikhail Chukin

Useful Links

Apply for short-term mobility

Visa Information

Our consortia


enmda

mmateng

ecobru

rkc

© Nosov Magnitogorsk State Technical University. Lenin Street, 38, Magnitogorsk city, Chelyabinsk Region, Russian Federation, 455000

Phone: +7 (3519) 298-402 / Fax: +7 (3519) 235-759